Many customers are not well-versed in the proper use of stainless steel hose clamps, such as the hose clamp tool, or how to appropriately address common issues like inadequate sealing with hose clamp use. Oftentimes, these problems are not directly related to the quality of the hose clamp itself but may stem from incorrect model selection or an aging rubber hose. It's essential to remember that a hose clamp's primary function is to provide radial loop force to prevent the hose from being pulled or dragged. This article will briefly discuss some common issues and their possible solutions.
1. Insufficient sealing: The hose may not be suitable for the joint; the inner diameter of the hose should be smaller than the outer diameter of the joint. If the inner diameter of the hose is larger than the joint, even using a large hose clamp tool won't be effective, as the hose will wrinkle around the joint, similar to a belt.
2. Deep axial scratches on the seal could create a leakage channel, which may lead to pressure exceeding the sealing structure's tolerance limit. In such cases, hose clamp manufacturers typically recommend replacing the sealing structure, possibly opting for solutions like snap-on connectors or other alternatives.
